![]() Firmware updates to address the Intel Security Advisory INTEL-SA-00459 (CVE-2020-24507, CVE-2020-8703, and CVE. BIOS 1.8.0 - Fixed the issue where the display flickers when the system is idle. AEMP automatically detects the memory chips on your kit and then presents optimized frequency, timing and voltage profiles that you can effortlessly apply to unleash performance. BIOS 1.7.0 - Fixed the issue where Standard SATA AHCI Controller shows yellow exclamation mark in Device Manager after AHCI mode in enabled in BIOS. ![]() Prime Z690-A leverages onboard hardware and firmware to cleverly work around this irksome limitation, enabling voltage adjustments to be applied through the same soft system-reset process employed for previous generations of DDR memory.įor users new to memory overclocking, Prime Z690-A includes the exclusive ASUS Enhanced Memory Profile (AEMP) firmware feature for PMIC-restricted memory modules. ![]() The SATA AHCI Controller driver windows 10 handle all of the communication parts between the motherboard and the connected devices. It is the software interface which enables and handles the communication between the hardware and the system software efficiently. Open your Windows registry editor and make sure Start Value in the following keys are set to 0 Sadly I did NOT find much drivers on Asus website, in particular the SATA drivers for the Intel SATA Controller In device manager I have listed under IDE ATA/ATAP Controllers category the following 3 entries: Standard SATA AHCI Controller. Ordinarily, a restricted PMIC that has been unlocked requires the system to be fully power-cycled each time memory voltage is adjusted. The AHCI stands for Advanced Host Controller Interface. Prime Z690-A enhances DDR5 performance by providing overclocking options for not only high-speed kits, but even entry-level memory modules that have a locked power management IC (PMIC).Ī dedicated circuit on the motherboard safely circumvents DDR5 memory PMIC restrictions, allowing you to step past the default 1.1-volt limit and push frequency and timings to the max. The only info I found is that we should use MS Win 10 SATA AHCI driver (pre installed) for our controller. I got OS 'freezing', from time to time, so I have to reboot my PC. Im trying to use this hardware with Samsung 860 EVO SSD disk which has Windows 10 圆4 installed on it. ![]() Intel ® Socket LGA1700 for 13th and 12th Gen Intel ® Core™ Processors Ive got Asus M4A89GTD Pro motherboard, which has AMD 890GX controller.
0 Comments
Leave a Reply. |